8700064607, 9971555775, 9319430334
Make: Waxcon Ventures
Capacity: 100/150/200 Ton
Model: Digital
Type:Channel Based
Loading Unit: - The hydraulic jack of is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw, which passes thru the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jackram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
Pumping Unit :- The motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 440 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a Rubber Hose Pipe. A junction box is suitable fixed to connect the motor to the mains thru a push button starter.
Waxcon Ventures Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS: 1610 and IS: 1828, FIE Compression Testing Machines comply with Grade "A" of BS: 1610 and class 1 of IS 1828.
An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.
Make: Waxcon Ventures
For measuring of resistance of aggregate to crushing.
Specification: Consists of M.S. Cylindrical Container 150mm ± 0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm/sqr. X to 115mm high. Supplied complete with tamping rod.
16mm dia x 600mm long. One end rounded. And 1 no. metal
Measure 115± 0.5mm dia x 180mm high.
Make : Waxcon Ventures
Model : WV:RMM-01
Specification : The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 – 25% X 1% on the wet weight Waxcon Ventures, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle for through Mixing.
Make: Waxcon Ventures
Size: 12x12x12, 14x14x14, 18x18x18, 18x18x24, 24x24x24,x24x24x36 Etc.
Specification
Sensitivity: +/- 1 C Degree
o Thermostatically Controlled
o Air Circulating Fan
o Digital Display
o Inside Aluminum Outside MS Powder Coating
o Temp rang 0- 250 Degree
o Thermostatic Control
o Built in thermometer
o Heating Elements on both sides
o Two to three removable shelves
o Power supply 220/230Volt A.C & Other Sizes also available
Specification
Make : Waxcon ventures
Model : WV:SRM-100/150/2000
The complete apparatus consists one each of small sand pouring cylinder, 3 liter capacity, Fitted with conical funnel and shutter.
Cylinder calibrating container, Internal dia 10cm and internal depth 15 cm Fitted with flange, metal tray.
Size 4”(100 mm)
Size 5” (150 mm)
Size 6” (200 mm)
Laboratory C.B.R Test Apparatus is widely used in laboratories and using international standards set by the industry. It is known for its best features quick and accurate reading. This laboratory C.B.R test apparatus gives high performance, durable and easy to operate. Laboratory C.B.R apparatus is designed using advanced technologies and uniformly constructed. It is made by our team of efficient engineers using cutting edge technology. Waxcon Ventures offer best deals at really reasonable price in the market.
Stability Test of Cylindrical specimen of bituminous paving mixture is the most frequently used by highway departments, contractors, engineers and testing laboratories. This test is carried out to measure the resistance to plastic flow of Cylindrical specimen of bituminous paving mixture loaded on the lateral surface.
Make: Waxcon Ventures
Accessories
Operated on 230 Volts A.C.
Panel cut out size 92 x 188 mms.
Provision for default calibration
Compaction Rammers
Breaking head assembly
Specimen mould 10.16cm I.D. x 7.6cm
Kit for specimen extraction
Facility to read in kg. and KN
Digital display to measure the load up to 5000 Kg /50 KN
Type: Manually
Model: WV:RH-M
Complete with wooden box by waxcon ventures, our Concrete Test Hammers are easy to use. These are used for quick and approximate measurement of the resistance to pressure of manufactured concrete products. Our products work on the principles based on the rebound impact of a hammer on a piston that rests against the surface of the concrete products.
Type: Manual/Electric
Make: Waxcon Ventures
Size: 12” (200 & 300 mm)
The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction if the stop pin below the table is removed, the shaker can have a rotary motion.