De-Watering

Double Beam Vibrator

Model: WV: BV4200
Make: Waxcon Ventures
Power: 2 HP
Length: 4200 mm

Surface Finishing Screed

This machine is employed as a surface finishing tool. Easy to handle and operate over the concrete surfaces and efficient in operation are few of the salient features of this unit. Specifications are as mentioned below.
Model : SFS-P (Waxcon)
Engine : 4 Stroke Petrol Engine HP 1.9 hp With 04 Feet Blade
Weight : 12.7 Kg.

Specially design, hardened aluminium blade ensuring a smoother finish than conventional screeds:

• Heavy rubber mounts to reduce the vibration level on the handle
• Adjustable handle in height, vertical & horizontal position (optional)
• The rounded ends of the blade make it easy to go around obstacles
• The tilt-up stand keeps the engine out of concrete or off the ground when not in use
• One piece casting body easy connect to engine
• Emergency stop switch available
• 7 different working widths: 4ft/1.2m, 6ft/1.8m, 8ft/2.4m, 10ft/3.0m, 12ft/3.7m, 14ft/4.3m, 16ft/4.9m
• Easily changed blades

Concrete Truss Screed

Make: Waxcon Ventures
Power: 5.5 HP Engine / Motor
Working Width: 6 mtr
Working depth: 260 cm
Frequency: 70 Hz
Material: AL or MS
Standard Saction: 1000 mm
Excitation Force (kn/2000mm): 11

• High durability
• Superior strength
• Precisely designed

The vibratory truss screed is a manually operated paving machine and is mainly used for slurry extraction, compression, levelling of the concrete in construction of Concrete Roads, Workshops Industrial Flooring, By-lanes, Walkways, Container stack yards etc. The main frame is made of steel which is strong and deformation free and vibration is provided by an in-built eccentric shaft connected to the engine/motor.

Walk Behind Power Trowel

Technical Specification
Model: WV: PT-36
Make: Waxcon
Power: 2 Kw Motor or 5 HP Honda Engine
Operation Mass (Kg.): 60 kg.
Rotor Diameter: 36 inch
Pitch Range: 0-15 Digree
Speed: 60-100 RPM

Concrete Cutter / Floor Saw / Groove Cutter

Model: WV: CC-500
Make: Waxcon
Engine: 9 HP Greaves or 7.5 HP Electric Motor
Type: Air Cooled, Single Cylinder, 4-Stroke
Disc Diameter: 350mm, 400mm, 450 mm
Max. Cutting Depth: 15cm
Operation Weight: 130 kg.
Size: 930x610x1050 mm

Vacuum pump for De-watering

This is the core of the system. A continuous discharge vacuum pump is complete self contained unit. The unit is mounted on a transportation trolly, 24 Sq. Meter freshly laid concrete can be Dewatered in one single operation with one set mat.The pump is powered by 7.5 H.P. 3 Phaseelectric motor.

Model: VP-48
Make: Waxcon
Length: 1200 mm
Width:500 mm
Height: 800 mm
Weight: 110kg
Max. Dewotering Capacity: 48 sq. Mt.
Prime Mover: Electric
Power Rating: 7.5 H.P. Motor

Filter, Suction and top Mat : Suction mat is placed directly on the green concrete after vibro screed operation is over. A special high class nylon filter is fixed on plastic mats which acts a filter during the vacuum operation filter mats in different sizes are provided with the system, Top mat is provided the junction box and is dewatering placed on top of filter mat for the purpose of sealing special synthetic cloth is used in the top mat it comes in standard sizes of 4X6 meter.

Accessories of De-Watering System

OTHER ACCESSORIES
Top Mat – 1Pcs. Required
Filter Mat – 4Pcs. Required
Suction Pipe with Steel QC Fitting
Pannel Board – 2Pcs. Required